bsp;  
V25 VOLUME OUTPUT DATA AT 25% 3D   
V50 VOLUME OUTPUT DATA AT 50% 57   
BRTS SUB BRIGHTNESS 副亮度 00   
VM2 VCD 模式 详情附后 34   
MODE0 详情附后 4B   
MODE1 详情附后 E0   
MODE2 详情附后 0F   
SELF SELECTION OF THE OUTPUT OF PIN 4 OF TB1240 00   
SELF-VCO PRESET DATA OF AFT VOLTAGE  80   
SELF-AGC PRESET DATA OF 1/2AGC VOLTAGE 69   
SELF-BRTC PRESET DATA OF VOLTAGE BETWEEN BLACK LEVEL AND VSS 75   
SELF-CNTC PRESET DATA OF VOLTAGE BETWEEN BLACK LEVEL AND WHITE LEVEL 23   
SELF-TNTC PRESET DATA OF VOLTAGE BETWEEN BLACK LEVEL AND WHITE LEVEL 00   
SELF-COL PRESET DATA OF VOLTAGE BETWEEN RED LEVEL AND MAGENTA LEVEL 20   
LOGO左边界 LOGO设置 0B   
LOGO 右边界 LOGO设置 7F   
LOGO上边界 LOGO设置 0E   
LOGO 下边界 LOGO 设置 46   
WAIT TIME 开机等待时间 3F 
OPT：
 
BIT FUNCTION   
0 Mute ON/OFF when B.B is OFFｉｎ　ＮＯSignal(=1:OFF)   
1 EXT_Mute ON/OFF when B.B is OFFｉｎ　ＮＯSignal(=1:OFF)   
2 V_Mute ON/OFF when ＣＨ changes(=1:ON)   
3 AUDIO GAIN SW of tb1240   
4 Not VT Down of AFT when No Signal(=1)   
5 Exmute unuse   
6 Not use   
7 Not use 

VMO：
 
BIT FUNCTION   
0 ID-SW ID sensitivity 0:Normal;1:Low &

 << 上一页  [21] [22] [23] [24] [25] [26] [27] [28] [29] [30]  ... 下一页  >> 

需要技术服务： 李师傅电话18277394428